SecureSeal™ Adhesive Sheets
SECURESEAL™ ADHESIVE SHEETS
These adhesive sheets are made using the same SecureSeal™ adhesive used in HybriWell™ and SecureSeal™ Incubation Chambers. Thin double-sided tape on a non-woven carrier, clear polyester liner on one surface, white clay coated paper on the other. SecureSeal™ Sheets consist of various thicknesses to choose from. These double-sided adhesive sheets measure 7 x 10 inches.
Applications
- Imaging
- Tissue and Cell staining
- High Resolution Microscopy
Imaging spacers are ultra-thin adhesive spacers which peel-and-stick to coverglass or microscope slides to confine specimens without compression. Layer multiple spacers to custom build chambers to any depth desired. Thin, double-sided adhesive spacers confine specimens without compression. For high resolution microscopy, sandwich specimen and spacer between two No. 0 coverglass. Imaging spacers can be fabricated in different material and thickness for specific applications. The adhesive, also used to make Wound Splints, HybriWell and SecureSeal incubation chambers, is now available in sheets that may be purchased in a single layer thickness or prepared in multiple layers for your convenience.
Silicone Isolators allow researchers to isolate specimens using removable hydrophobic barriers. They may be used to isolate cells grown in culture dishes or separate multiple specimens affixed to microscope slides. Isolators are available in red silicone thickness 0.5 to 2.5mm pre-cut or as sheet material with or without secure seal clean adhesive on one or both surfaces. Nonadhesive isolators are autoclavable and reusable.Silicone Isolators™ remain sealed to smooth surfaces during washing steps. Where additional sealing is required, SecureSeal™ adhesive on one or both surfaces is recommended.
