ProPlate® Multi-Well Chambers 246861_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-150×150
246861_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-150×150

246861_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-150×150

IN
·

Technical engineering drawing for Grace Bio-Labs part number 246861, detailing a ProPlate component assembly. The schematic includes a front view, cross-section A-A, and an end view showcasing a 1-well superstructure, silicone gasket, and molded Delrin snap clips clamping an omitted slide interface. Total length is 75.8 mm, structural profile height is 25 mm, total height including clips is 32 mm, and end view depth profile is 11 mm. The diagram outlines a single continuous large rectangular well chamber featuring an inner opening length of 70.1 mm typical length by 16.6 mm typical height, set with a 4.2 mm bottom outer edge clearance and a 2.8 mm side edge offset.

Grace Bio-Labs ProPlate 1-Well Superstructure Assembly (#246861) | Technical blueprint outlining specifications for a laboratory multi-well slide superstructure component. Features a robust 1-well superstructure base secured by molded Delrin snap clips and an internal silicone gasket designed to seal tightly against a standard slide interface. Full component outer dimensions measure 75.8 mm in length by 25 mm in height (32 mm total profile height with clips), featuring a single continuous high-capacity rectangular well chamber with an inner opening dimension of 70.1 mm x 16.6 mm. Dimensions are for reference only.