ProPlate® Multi-Well Chambers 246855_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150
246855_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150

246855_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150

IN
·

Technical engineering drawing for Grace Bio-Labs part number 246855, detailing a ProPlate component assembly. The schematic includes a front view, cross-section A-A, and an end view showcasing a 64-well superstructure, silicone gasket, and an omitted slide interface. Total length is 75.8 mm, structural profile height is 25 mm, and end view depth profile is 11 mm. The diagram outlines a four-row by sixteen-column grid array of 64 small square wells, each measuring 3.5 mm typical width by 3.5 mm typical height, set on a 4.5 mm typical horizontal and vertical center-to-center pitch with a 1 mm typical dividing wall thickness, a 4 mm bottom outer edge clearance, and a 2.1 mm side edge offset.

Grace Bio-Labs ProPlate 64-Well Superstructure Module (#246855) | Technical blueprint outlining specifications for a laboratory high-density multi-well slide superstructure component. Features a high-density 64-well superstructure base with an internal silicone gasket designed to seal tightly against a standard slide interface. Full component outer dimensions measure 75.8 mm in length by 25 mm in height with an 11 mm depth profile, featuring 64 square assay wells arranged in a four-row by sixteen-column grid array with a typical individual well opening dimension of 3.5 mm x 3.5 mm on a uniform 4.5 mm pitch spacing. Dimensions are for reference only.