ProPlate® Multi-Well Chambers 470635_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180
470635_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180

470635_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180

IN
·

Technical engineering drawing for Grace Bio-Labs part number 470635, detailing a ProPlate component assembly. The schematic includes a front view, cross-section A-A, and an end view showcasing a 3-well superstructure, silicone gasket, and an omitted slide interface. Total length is 75.8 mm, structural profile height is 25 mm, and end view depth profile is 11 mm. The diagram outlines a single linear row array of 3 large square wells, each measuring 20 mm typical width by 20 mm typical height, set on a 23.5 mm typical pitch spacing with a 3.5 mm typical horizontal dividing wall thickness, a 2.5 mm bottom outer edge clearance, and a 2.6 mm side edge offset.

Grace Bio-Labs ProPlate 3-Well Superstructure Module (#470635) | Technical blueprint outlining specifications for a laboratory multi-well slide superstructure component. Features a 3-well superstructure base with a modified silicone gasket designed to seal tightly against nitrocellulose-coated glass slide substrates (ONCYTE® pads) without clips. Full component outer dimensions measure 75.8 mm in length by 25 mm in height with an 11 mm depth profile, featuring 3 square assay wells arranged in a single linear row with individual well opening dimensions of 20 mm x 20 mm x 7.6 mm depth on a 23.5 mm pitch spacing. Dimensions are for reference only.