ProPlate® Multi-Well Chambers 248864_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150
248864_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150

248864_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150

IN
·

Technical engineering drawing for Grace Bio-Labs part number 248864, detailing a ProPlate component assembly. The schematic includes a front view, cross-section A-A, and an end view showcasing a 4-well superstructure, silicone gasket, and stainless steel spring clips clamping an omitted slide interface. Total length is 75.8 mm, structural profile height is 25 mm, total height including clips is 32 mm, and end view depth profile is 11 mm. The diagram outlines a single linear row array of 4 large square wells, each measuring 16.3 mm typical width by 16.5 mm typical height (nominal 16 mm x 16 mm opening area), set with a 1.6 mm typical horizontal dividing wall thickness, a 4.2 mm bottom outer edge clearance, and a 2.8 mm side edge offset.

Grace Bio-Labs ProPlate 4-Well Superstructure Assembly (#248864) | Technical blueprint outlining specifications for a laboratory multi-well slide superstructure component. Features a robust 4-well superstructure base secured by stainless steel spring clips and an internal silicone gasket designed to seal tightly against a standard slide interface without adhesives. Full component outer dimensions measure 75.8 mm in length by 25 mm in height (32 mm total profile height with clips), featuring 4 large square assay wells arranged in a single linear row with individual typical well opening dimensions of 16.3 mm x 16.5 mm (16 mm x 16 mm). Dimensions are for reference only.