ProPlate® Multi-Well Chambers 248861_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150
248861_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150

248861_ProPlate_Multi-Well_Chambers_Drawing_1_Web_Rev_0-180×180-150×150

IN
·

Technical engineering drawing for Grace Bio-Labs part number 248861, detailing a ProPlate component assembly. The schematic includes a front view, cross-section A-A, and an end view showcasing a 1-well superstructure, silicone gasket, and stainless steel spring clips clamping an omitted slide interface. Total length is 75.8 mm, structural profile height is 25 mm, total height including clips is 32 mm, and end view depth profile is 11 mm. The diagram outlines a single large rectangular well measuring 16.5 mm typical width by 70 mm typical height (nominal 16.5 mm x 70 mm opening area), set with a 4.2 mm bottom outer edge clearance and a 2.8 mm side edge offset.

Grace Bio-Labs ProPlate 1-Well Superstructure Assembly (#248861) | Technical blueprint outlining specifications for a laboratory single-well slide superstructure component. Features a robust 1-well superstructure base secured by stainless steel spring clips and an internal silicone gasket designed to seal tightly against a standard slide interface without adhesives. Full component outer dimensions measure 75.8 mm in length by 25 mm in height (32 mm total profile height with clips), featuring 1 large rectangular assay well with individual typical well opening dimensions of 16.5 mm x 70 mm. Dimensions are for reference only.