ProPlate® Gaskets Only 246871_ProPlate_Gaskets_Only_Drawing_1_Web_Rev_0-150×150
246871_ProPlate_Gaskets_Only_Drawing_1_Web_Rev_0-150×150

246871_ProPlate_Gaskets_Only_Drawing_1_Web_Rev_0-150×150

IN
·

Technical engineering drawing for Grace Bio-Labs part number 246871, detailing a ProPlate component assembly. The schematic includes a front view, cross-section A-A, and an end view showcasing a 1-well superstructure module and silicone gasket, with an omitted slide interface. Total length is 75.8 mm, structural profile height is 25 mm, and end view depth profile is 11 mm. The diagram outlines a single continuous high-capacity rectangular well chamber measuring 16.6 mm typical width by 70.1 mm typical length (nominal 16.5 mm x 70 mm opening area), set with a 4.2 mm bottom outer edge clearance and a 2.8 mm side edge offset.

Grace Bio-Labs ProPlate 1-Well Superstructure Module / Silicone Gasket (#246871) | Technical blueprint outlining specifications for a laboratory multi-well slide superstructure component. Features a robust 1-well superstructure base with an integrated silicone gasket designed to seal tightly against glass slide substrates without clips. Full component outer dimensions measure 75.8 mm in length by 25 mm in height with an 11 mm depth profile, featuring a single continuous rectangular assay chamber with individual typical well opening dimensions of 16.6 mm x 70.1 mm (16.5 mm x 70 mm nominal opening area). Dimensions are for reference only.